RULE

Description of the rule

Specific Code not to be changed

Value for this rule

Secondary Value

Enable Respose Time Audit (enableresposetimeaudit)

This setting uses the logging process to record the start and end of a transaction response time in the database. The event is recorded by a timer with checkpoints and timestamps that is added programmatically to your environment. Rule is set to ‘FALSE’ by default.

Enable Scan Pack Countdown Duing Inspection (enablescanpackcountdownduinginspection)

This setting implements the scan-pack countdown during the inspect container process. The scan-pack countdown removes an item from the list when an operator scans it for packing. This process also alerts the operator when all items in a container have been scanned. Rule is set to ‘TRUE’ by default.

Use ERP-defined SSCC Pack Attributes (useerpdefinedssccpackattributes)

This setting will use the pack attributes defined in NetSuite by default instead of the attributes defined in ShipHawk WMS. Rule is set to ‘FALSE’ by default.

USPS Media Mail

This setting adds UPS Media Mail as a shipping service.

Enable Hub Address on BOL (enablehubaddressonbol)

This rule applies orders consolidated on the BOL. This setting overrides the ‘Ship To’ address on the BOL to match with customer records from the Address Table. The Address Table contains an element that stores the hub. Rule is set to ‘TRUE’ by default.

Enable HMAC-SHA256 Signature Method (sha256)

This setting uses HMAC - SHA256 as an authentication code that uses hashings for security. If not set, the authentication method will default to HMAC-SH1. Note: HMAC-SHA1 is deprecated as of NS 2021.2 Rule is set to ‘TRUE’ by default.

Enable SCAC Lookup (enablescaclookup)

This setting adds an SCAC lookup option to the Source Data Maintenance page. A SCAC is a unique code used to identify carriers. Rule is set to ‘FALSE’ by default.

Default Container Type (defaultcontainertype)

This rule sets a default container type that is used upon weighing. This rule is used with “Pack Add” (under the Pack/Inspect option in ShipHawk WMS) only. The Container Type is set to 12x12x12’ by default.

Enable Order Hold Code (enableorderholdcode)

This setting will place an order hold when a value is specified in the ‘salesorder.so_hold_code’ element. When an order hold is placed, allocation in wave and fulfillment processing cannot occur Rule is set to ‘FALSE’ by default.

Disable BOL Handling Units (disablebolhandlingunits)

This setting will disable the ‘Handling Units & Packages’ display on the BOL, leaving the field blank. This means you will be able to manually write in values for this field instead. This is a solution for users who have specific cartons and pallets that are not defined in ShipHawk WMS. Rule is set to ‘FALSE’ by default.

Use Customer PO Number on BOL (usecustomerponumberonbol)

This setting fills in the Customer PO Number in the ‘Customer Order No’ section on the BOL. This differs from the default, in which the ShipHawk WMS Order No is used instead. Rule is set to ‘FALSE’ by default.

Print Copies of BOL (bolcopies)

The default number of copies printed of the BOL. Rule is set to print ‘1’ copy by default.

Include Pallet Tare Weight on BOL (includepallettareweightonbol)

This setting will add a TARE weight line on the BOL. When a value is entered for the TARE weight, this value is multiplied by the number of pallets created for the shipment. The weight of a typical pallet should be entered in ShipHawk WMS when using this setting. Note: An empty value will not alter the BOL. Typical Pallet Weight is set to ‘40’ by default.

SPS Bearer Token and Expiration (spsbearertoken)

This setting stores the SPS bearer token and its related expiration date/time when it is retrieved via the SPS API. It is important that the value of the token persists, as only 10 API calls to the SPS token are permitted per hour. The token is stored as a JSON string.

Alter Table customer Add Column cust_label_v2_id

Add element to store the SPS Retail Label V2 ID, this element is used when rule (enablespsv2) is ‘TRUE’.

Alter Table archivesalesorder Add Column so_confirm_date datetime

Add column to the archivesalesorder table to record the date/time confirmation of the sales order

CSV 940 API Create Shipments (csv1apicreateshipments)

Enable this setting to create shipments from sales orders using the 940 CSV API. Rule is set to ‘FALSE’ by default.

Allocate Orders on Hold allocateordersonhold)

Enable this setting to allocate all orders that have been placed on hold, and hold them in the’Wave Unreleased’ tab. Rule is set to ‘FALSE’ by default.

Remove Cancelled Order from Database (removecancelledorderfromdatabase)

If this setting is enabled, a cancelled order will be removed from the ShipHawk WMS database. This differs from the default configuration in which a rule is marked as ‘cancelled’ but still remains in the database for record keeping purposes. Note: This Rule must be set to ‘TRUE’ if your ERP system will send new orders with the same Sales Order number as a cancelled order. Rule is set to ‘FALSE’ by default.

Display Packing Messages at Shipping (displaypackingmessagesatshipping)

This setting will present packing messages to operators during the shipping process. Packing messages are intended to assist operators in preparing containers/packages for shipment. Rule is set to ‘FALSE’ by default.

Inbound ASN Version Enabled (inboundasnversionenabled)

Specify whether your account manages Inbound ASNs. If this setting is enabled, ShipHawk WMS will accept and manage Inbound ASNs (which are then mirrored as Inbound Shipments in NetSuite). There are three options to select from: 0 - feature not used 1 - initial version deployed 2 - newest version deployed, for all new customers Rule is set to 0 by default.

Enable Dulicate Item Name Cleanup (enabledulicateitemnamecleanup)

This setting takes duplicate item names with separate internal IDs and adds a prefix of ‘INACTIVE-‘ to the item name that has not been updated in over 10 days. This process occurs during the archiving process. Rule is set to ‘FALSE’ by default.

Enable Trinium TMS API (enabletriniumtmsapi)

Enable the Trinium TMS Invoice and Billing API setting. When enabled, this setting can suppress a trinium invoice or bill through API. Rule is set to ‘FALSE’ by default.

Assign One-Order Super Batch Tote to a Cluster Pick (assign1ordersbtoacluster)

By default, a (unique) single line multi-quantity order will be assigned as a tote in a super batch task. This setting overrides the default assignment and places the order in a cluster task. Rule is set to ‘FALSE’ by default.

Viewport Scaling Factor (viewportscalingfactor)

Set a fixed custom viewport for all terminals. Scaling is normally set accordingly by mobile device. Ex setting: 1.15 = +15% scaling from default device resolution

RocketShipIt API Key (rocketshipitapikey)

UseRocketShipIt API key as the default for ShipHawk WMS shipping. This setting will override the default key for your ShipHawk account.

Enable Wave Batch Optimiztion (enablewavebatchoptimiztion)

Enable this setting to combine all wave batches into a single wave that is not limited by a batch threshold. Rule is set to ‘FALSE’ by default.

Set Pick Standards (pickstandards)

Set custom pick standards for your containers, bins, items, and units. Rule is empty by default, enter JSON string: { “seconds_per_container”: 5.0, “seconds_per_bin”: 30.0, “seconds_per_item”: 15.0 “seconds_per_unit”: 2.0 }

Enable LOV Table for Putaway Rules (enablelovtableforputawayrules)

When enabled, this setting uses LOV tables to represent putaway rules. This means putaway rules are defined in this table. Rule is set to ‘FALSE’ by default.

Enable LOV Table for Allocation Rules (enablelovtableforallocationrules)

When enabled, this setting uses LOV tables to represent allocation rules. This means allocation rules are defined in this table. Rule is set to ‘FALSE’ by default.

Enable Strong Password Enforcement (enablestrongpasswordenforcement)

This setting requires users to have a password with at least 8 characters, one upper case letter, one number, and one special character. Rule is set to ‘FALSE’ by default.

Minimum Password Length (must be at least 6) (minimumpasswordlength)

This setting requires users to have a minimum password length. A minimum of ‘6’ characters will be required by default.

Minimum Password Elements (minimumpasswordelements)

This setting requires a minimum number of password elements derived from: upper, lower, number and special characters. Rule is set to ‘3’ by default.

Maximum Percent Bin Cube Utilization (maximumpercentbincubeutilization)

This setting setts the default rate at which a bin cube is used. Rule is set to ‘100’ percent by default.

Use Default BOL Commity, NMFC, Class Settings (usedefaultbolnmfc)

This setting will use BOL Commodity, NMFC, and Class settings instead of item-based settings. Rule is set to ‘FALSE’ by default.

Suggested Putaway Display Limit on Carts (suggestedputawaydisplaylimitoncarts)

This setting sets an item count limit that stops suggesting putaway bins for cart-based receipts when the limit is reached. This setting only applies to cart-based putaway to provide the operator insight on where the cart will travel. Rule is set to ‘35’ by default. This means a list of 35 items on a cart will all have suggested bins computed on the page.

Enable Operator-Directed Pick Sequence (enableoperatordirectedpicksequence)

This rule enables an operator-directed picking sequence for order picks. When enabled, a list of picks is presented to the operator, allowing them to select the next pick they want to perform from any remaining pick in the list. This setting is useful when the travel sequence is not the best pallet building sequence based on item weight and cube. Rule is set to ‘FALSE’ by default.

Enable ShpHawk API (enableshiphawkap)

Use ShipHawk API key as the default for ShipHawk WMS shipping. This will override RocketShipIt as the shipping service. Rule is set to ‘FALSE’ by default.

ShipHawk API Key (shiphawkapikey)

Use this field to enter your ShipHawk API key. Default key is ‘482226fba594ebccb227733221edcd47’

Integrated Pick/Pack Process (pickandpack

Update this setting to enable integrated picking and packing that allows for JSON as an option.

Alloc Group Roots for Forward, B/S and Reserve (allocationgrouprootids)

This setting is used for replenishment of outbound groups. This rule sets allocation group root IDs to forward, backstock, and reserve groups. Root IDs are used to asses inventory levels in each outbound group. Inventory is replenished from backstock or reserve to forward. Rule is empty by default, enter JSON string: { “forward”: “FORWARD”, “backstock”: “BACKSTOCK”, “reserve”: “RESERVE”, “minimumqty”: 30, “urgentqty”: 10 }

Auto-Release and Print (enableautoreleaseandprint)

This setting enables auto-release and auto-print. Note: This setting will only work if the auto-releasing and printing logic has been defined for your account. Rule is set to ‘FALSE’ by default.

Display Unshipped (Quantity) on Admin Page (displayunshipped)

This setting can be used to disable or enable the auto-releasing and printing logic that has been defined for an account. Rule is set to ‘FALSE’ by default.

Enable Count Plan by Item (enablecountplanbyitem)

This setting allows operators to list and use Items/SKUs in the bin count plan table instead of Bin IDs. This means counting happens by item rather than bin. Note: If enabled, an item id element must exist in the bin count plan table. (See rule below) Rule is set to ‘TRUE’ by default.

Alter Table bincountplan Add Column plan_item_id

Add item id to bin count plan table. This setting is needed for the ‘Enable Count Plan by Item’ rule to work.

Alter Table customer Add Column cust_label_print Alter Table customer Add Column cust_confirm_as_packed

Add new customer table elements that identify when to create SSC18 labels (Pack or Ship), and when to confirm shipments into NetSuite (Packed or Shipped). Rule is set to ‘Shipped’ by default.

Enable Perfect Match Allocation (enableperfectmatchallocation)

This setting will allocate perfect match quantities to needed quantities of inventory, regardless of the outbound group sequence the inventory is located in. Rule is set to ‘TRUE’ by default.

Alter Table archivesalesorder Add Column so_addr3 Alter Table address Add Column addr_addr3

Add Address Line 3 to salesorder and address tables. NetSuite has an optional Address Line 3 that can be enabled in the Address Form if needed for longer addresses.

Enable SLSQ Wave Picking (enableslsqwavepicking)

Single Line Single Quantity (SLSQ) orders are defined in Super Batch batches by default. This setting will isolate SLSQ ordrs from Super Batch batches and create a Single Wave batch pick. A set of labels for this pick will be printed at wave release. Rule is set to ‘FALSE’ by default.

Disable Putaway Dropdown List (disableputawaydropdownlist)

This setting disables the standard putaway dropdown list. If your ShipHawk WMS setup requires operators to scan Container or Item IDs for putaway, then this rule should be set to ‘TRUE’ so the dropdown can be disabled for performance. Rule is set to ‘FALSE’ by default.

Enable SPS V2 (enablespsv2)

Enable version 2.0 of the SPS Retail Label and Pack List Subsystem. This API supports the creation of Pack Lists and SSCC18 Labels that are customer/retailer specific. Version 2.0 is a JSON/REST-based API. Rule is set to ‘FALSE’ by default.

Enable HAZMAT Listing on BOL (enablehazmatlistingonbol)

This setting lists hazmat data on the VICS BOL in the ‘Carrier Informaiton’ section. When hazmat data is listed, handling units and package data are suprressed. Commodity description on BOL will contain: UN ID, Proper Shipping Name, Hazmat Class, Packaging Class. Rule is set to ‘FALSE’ by default.

Enable Font Awesome Fonts (enablefontawesomefonts)

This setting will enable font awesome fonts on the ShipHawk WMS website. See:https://fontawesome.com Rule is set to ‘FALSE’ by default.

Font Awesome Icon Color (fontawesomeiconcolor)

Use this rule to change the default ShipHawk WMS logo colors using font awesome colors. Rule is set to ‘#295177’ by default, which is the default ShipHawk WMS logo color.

Enable Blind Physical Count (enableblindphysicalcount)

This setting will make physical counts blind, which means the expected quantities for items in the bin will not be displayed. Rule is set to ‘FALSE’ by default.

Suppress Container Merge Alert (supprersscontainerrmergealert)

This setting will disable the container merge alert, which informs operators of containers in inbound groups that will be automatically merged. Rule is set to ‘FALSE’ by default.

Enable Crossdock Demand (enablecrossdockdemand)

Add a crossdock demand table for API crossdock demand. This table will display open order demand from the ERP system. Rule is set to ‘FALSE’ by default.

Alter Table salesorder, archivesalesorder salesorderdetail, archivesalesoderdetail Add Column so_header_attributes

Add header and detail attributes to salesorder and salesorderdettail tables that can store a JSON object defined in the API. A user would want to enable this rule if they have defined custom elements.

API Authentication Token (x-token)

If an external API is used, this rule sets the custom API token for authentification. Rule is set to ‘ShipHawk WMS’ by default.

Filter Item Inventory by Division (filteriteminventorybydivision)

Use this setting to enable a filtered view of your inventory by assigned division. Rule is set to ‘FALSE’ by default.

Alter Table item Add Column item_division

Add item division, which will be used as a filter on the search/update page. This filter process is enabled by ‘Filter Item Inventory by Division’ Rule.

Bypass Kit Pricing Breakdown (bypasskitpricingbreakdown)

This setting will bypass the breakdown pricing of a kit to its individual components. This will result in each component being set to the entire kit price. A user would want to enable this rule if they have the kit and its price listed on packing documents. Rule is set to ‘FALSE’ by default.

Enable Dynamic Bill or Materials (BOM) (enabledynamicbom)

Enables the use of a dynamic BOM for assembling and disassembling. Dynamic BOMs are operator defined lists of Inventory Items needed to create another item Rule is set to ‘FALSE’ by default.

API Directory Path (apidirectorypath)

This rule establishes the directory path for API File processing. Path is ‘C:/Program Files/ShipHawk WMS/prod/files/’ by default.

Alter Table podetail Add Column po_detail_attributes, po_confirm_date

Add detail attributes to purchase order (PO) detail tables. Add purchase order element to record confirm date of the PO.

Alter Table binlocation Add column bin_cube_remain, bin_compute_cube_remain

Add columns bin cube remain and bin compute cube remain to support cube-cased putaway.

Shipping Labels per Pallet (shippinglabelsperpallet)

Use this rule to set the number of shipping labels to be generated per pallet for LTL shipments. This rule only applies when pallet building is used for an order, otherwise a single label per container shipped will be printed. Rule is set to print ‘2’ labels per pallet.

Alter Table podetail Add Column po_confirm_date

Add po confirm date element to purchase order detail table to record the confirmation date of the purchase order.

API Controls, by Host, Location, division, API (apicontAPI Controls, by Host, Location)

This setting can define API controls by host, location, division, and API using JSON. Rule is empty by default, enter JSON string: { “API”: { “loc”: { “div”: { “940”: true, “943”: true, “944”: true, “945”: true, “947”: true, } } } }

Enable Print Sequence Optimization enableprintsequenceoptimization)

This setting will change the default printing order and print based on the travel paths of the picks being released instead. Rule is set to ‘FALSE’ by default.

Do Not Confirm Receipt in Realtime (donotconfirmreceiptinrealtime)

Use this rule to disable realtime receipt confirmation. A user would want to enable this rule if they request receipt confirmation through the Administration page instead. Scheduled receipt confirm processes can also be used for ‘Purchase Orders Received Complete’. Rule is set to ‘FALSE’ by default.

Do Not Confirm Shipment in Realtime (donotconfirmshipmentinrealtime)

Use this rule to disable realtime shipment confirmation when processing a shipment. A user would want to enable this rule if their shipping process is performed by container, and a time delay must be used so that the operator can ship all containers in the shipment before it is confirmed to the ERP. Rule is set to ‘FALSE’ by default.

Require Pick Complete Before Packing Can Begin (requirepickcompletebeforepacking)

This setting will prohibit packing if an order is not picked 100% complete or resolved. Rule is set to ‘FALSE’ by default.

Enable FEDEX One Rate Pricing (enablefedexoneratepricing)

This setting will enable FedEx One Rate service pricing. Rule is set to ‘FALSE’ by default.

Enable Capture of Daily Effective Rate (enablecaptureofdailyeffectiverate)

This setting will capture the non-negotiated rate for a UPS shipment in addition to the negotiated rate. When enabled, the rate will take more time to execute. Rule is set to ‘FALSE’ by default.

Enable One World Rules (enableoneworldrules)

Use this setting to enable one-world logic in API transactions. This logic includes subsidiaries. Rule is set to ‘FALSE’ by default.

Suppress Using Container ID (suppressusingcontainerid)

This setting will prevent the use of Container IDs during receiving and moves. Only enable this option if the ‘Auto-Create Container ID Data Receiving’ and ‘Auto-Create Container ID Move’ rules are also enabled. Rule is set to ‘FALSE’ by default.

Validate Receiving Cart ID (validatereceivingcartid)

When enabled, this rule will only validate Receipt Card IDs that are scanned at receiving. This differs from the default, where any Cart ID type is be scanned at receiving. Rule is set to ‘FALSE’ by default.

Suppress BOL (suppressbol)

This setting will prevent BOLs from being printed for any shipment. It will also disable the creation of BOLs under the Administration page. Rule is set to ‘FALSE’ by default.

Print Ship Labels At Packing (printlabelsatpacking)

This setting determines whether labels are printed at packing. This is the same logic applied to the ‘Print Ship Labels at Receiving’ rule. Rule is empty by default, enter JSON string: { “print_label_default”: “NO”, “print_label_default_qty”: 1 }

Suppress Confirming Adjustments to ERP (suppressconfirmingadjustmentstoerp)

This rule will prevent confirmation of inventory adjustments to the ERP system through API. This rule is intended to be used during the full physical cycle counting process so individual adjustments are not posted while counts are reconciled. The updated inventory balance will post to the ERP system once, rather than post numerous individual adjustments. Rule is set to ‘FALSE’ by default.

Bypass Pick Profile Page (bypasspickprofilepage)

When enabled, the Pick Profile page in ShipHawk WMS is bypassed. Rule is set to ‘FALSE’ by default.

Enable Order Line Edting (enableorderlineediting)

This setting allows editing of order line quantities from the Administration Details page. From this page, an operator can set an order line value to ‘0’, or reduce the quantity to any value less than the ordered amount. Rule is set to ‘FALSE’ by default.

Do Not Allocate Days After Ship Date (donotallocatedaysaftershipdate)

This setting prevents orders from being allocated based on if their ship date is > than a certain number of days after the current date.

Freight Quote API (freightquoteapi)

This setting directs orders to freight quote APIs- either PLAN (for Shipments) or BUILD (for Orders). Enter your Freight Quote API as a string using this rule.

Print Case Labels At Receiving

This setting determines whether Case Labels are printed at receiving. Rule is empty by default, enter JSON string: { “print_label_default”: “NO”, “print_label_default_qty”: 1 “print_label_printer”: “0” }

Enable Ship Label Logo (enableshiplabellogo)

Use this setting to add a custom logo to print on the ship label. When enabled, this rule will print the logo on the label if a URL exists in salesorder.so_rep_id. Rule is set to ‘FALSE’ by default.

Default Ship Label Logo (defaultshiplabellogo)

Use this field to enter a default URL for every order if a specific URL is not defined for the order.

Enable Direct Multi Tracking Entry (enabledirectmultitrackingentry)

If tracking number capture is active, this setting will bypass the Receiving Tracking page and direct the operator to a multi-tracking capture form as the only option for entry. Rule is set to ‘FALSE’ by default.

Enable Shipping Account Override by Shipping Service (enableaccountoverridebyservice)

Use this rule to override any default carrier settings in favor of RocketShipIt settings. Rule is set to ‘FALSE’ by default.

Enable Pick List Archiving (enablepicklistarchiving)

If enabled, this setting will create PDF documents of pick lists instead of printing them. This is done so the PDF can be printed offline in case the system is not operating. Rule is set to ‘FALSE’ by default.

Create Table binadjustment

This rule will create a new Bin Adjustment table that captures inventory adjustment requests at the bin level that are sent by the ERP system.

Enable Alert Page (enablealertpage)

This setting will enable the generic Alert page. Rule is set to ‘TRUE’ by default.

Enable Batch Shipping (enablebatchshipping)

This setting will ship every order in a batch at once when task type is ‘Batch’ or ‘Super Batch’. When this rule is triggered, the weight and dimensions of the orders are captured at packing. Rule is set to ‘TRUE’ by default.

Integrated Packing/Shipping Process (packandship)

This setting will enable the integrated packing and shipping process. Rule is set to ‘FALSE’ by default.

Integrated Pick/Pack Process (pickandpack)

This setting will enable the integrated picking and packing process. Rule is set to ‘FALSE’ by default.

Enable Auto Pack Remaining to Current Container (enableautopackremaining)

This setting will auto-pack the remainder of a container when a user manually clicks the ‘Auto Pack Remaining’ button. Rule is set to ‘TRUE’ by default.

Enable Consolidated Instructions During Pick/Pack (enableconsolidatedinstructions)

This setting will display consolidated instructions to the operator during the picking and packing process. Rule is set to ‘FALSE’ by default.

Enable Code Date Entry (enablecodedateentry)

This rule allows for the entry of a code date (or lot expiration date) based on the lot code entered. Rule is set to ‘FALSE’ by default.

Cycle Count Window (cyclecountwindow)

Use this rule to set the period that a bin is considered counted before directed counting will be reconsidered. Rule is set to ‘60’ day count cycle by default.

Enable Ascending Order Putaway Sequence (enableascendingorderputawayseq)

When enabled, empty bins are arranged in ascending order for putaway. Ascending order means bins are arranged from smallest to largest and putaway in that order. Rule is set to ‘FALSE’ by default.

Skip Pack Directive (skippackdirective)

This rule skips Pack Directive Verification. Pack Directive Verification directs users to travel to a pack station. Rule is set to ‘FALSE’ by default.

Check Item Dimensions At Receiving (checkItemDimensionsAtReceiving)

This setting triggers a message that informs the operator they must capture weights and dimensions and enter them into NetSuite for an item during the receiving process. The message is triggered when any item has a LxWxH or weight of ‘0’ during receiving. Rule is set to ‘FALSE’ by default.

Enable UPS Mail Innovations (MI) Manifest (enableupsmi)

Use this setting to add a UPS Mail Innovations End of Day Manifest. Rule is set to ‘FALSE’ by default.

Always Ship Using Less Options (alwaysshipusinglessoptions)

This setting will always use the Less Options page if feasible, regardless of terms. Rule is set to ‘FALSE’ by default.

Shipping Rates (shippingrates)

This rule will load a table of shipping rates for simple manifesting calculations that is not already provided by the carrier. Rule is empty by default, enter the JSON string: { “M4”: { “1”: 2.56, “2”: 2.56 “3”: 2.56, “4”: 2.56 “5”: 2.56, “6”: 2.56 “7”: 2.56, “8”: 2.56 “9”: 2.56, “10”: 2.56 “11”: 2.56, “12”: 2.56 “13”: 2.56, “14”: 2.56 “15”: 2.56, “16”: 2.56 } }

Alter Table itemalias Add Column ia_date_last_updated date

Add item alias last updated date column to Item Alias table to track when an item alias has last been updated.

Enable NII (Non-Inventory Item) Allocation (enableiiallocation)

Allow non-inventory items to be allocated to assigned pick locations. Rule is set to ‘FALSE’ by default.

Enable Manual Freight Charge Entry (enablemanualfreightchargenetry)

Allow manual entry of freight charges on Ship Order page. This will replace the Shipment Authorization Number on that same page. Rule is set to ‘FALSE’ by default.

Pack Edit Do Not Create SSCC18 (packeditdonotcreatesscc18)

By default, when a new Container ID is entered, it is set as the alias ID for the container and a SSCC18 is generated as the actual ID for the new container. This rule stops the creation of an SSCC18 ID for new containers created in Pack Edit. Rule is set to ‘FALSE’ by default.

Schedule Orders Strictly By Priority (scheduleordersstrictlybypriority)

This setting schedules the next order to pick based off priority only, instead of assigning orders based off ship date first, then priority. Rule is set to ‘TRUE’ by default.

Print Copies of Commercial Invoice (commercialinvoicecopies)

Set the default number of copies printed for commercial invoices. Rule is set to print ‘1’ commercial invoice copy by default.

Enable Shipment Consolidation (enableshipmentconsolidation)

This setting lets users consolidate orders for shipment. When enabled, orders will be consolidated under the following circumstances: - Orders that share the same sales order consolidation number will be shipped together - Container IDs from two different orders scanned to the same Pallet Note: You must ensure the API does not automatically set sales order consolidation numbers, or multiple orders could be shipped together unknowingly. Rule is set to ‘FALSE’ by default.

Return Service Codes for Carriers (returnservicecode)

This rule will automatically assign a carrier return service code to a return service label when a label for return is requested. Return service codes define the service being used to ship the return. By default, the forwarding label service code is used as the return service code. This rule will override the default and use the carrier’s return service code instead. This rule is applicable to UPS and FEDEX service codes only. Rule is empty by default, enter the json string: { “UPS”: “03”, “FEDEX”: “FEDEX_GROUND” }

Manual Weight Required for Containers (manualweightrequiredforcontainers)

This rule will auto-set weights for containers with the same alias ID that are split using the ‘Edit Containers’ page. When set to ‘FALSE’, this rule allows split containers to be auto set with the same weight. When set to ‘TRUE’, every container weight must be captured and inputted manually.

Enable Unlimited Item Alias (enableunlimiteditemalias)

This setting provides access to a secondary Item Alias table. This Item Alias table stores unlimited item aliases, defined alias types, and customer specific aliases. Rule is set to ‘FALSE’ by default.

Threshold Maximum Quantity for Batch/Super Batch Batch/Wave Units (pickbatchmaximumunits)

This rule sets the maximum units that can be placed in a single batch. Rule is set to ‘10000’ units by default.

ConnectShip API Active (connectshipapiactive)

This rule connects to the UPS ConnectShip system through API. You can use UPS ConnectShip as your organizations shipping & rating service by activating the ConnectShip API. Rule is set to ‘FALSE’ by default.

Print an SSCC18 id at packing for shipping containers

When enabled, this rule will create SSCC18 labels at Packing. By default, SSCC18 labels are generated at Shipping. Rule is set to ‘FALSE’ by default.

Confirm Receipt Using Transfer (confirmreceiptusingtransfer)

This rule enables the use of an Inventory Transfer to post purchase order receipts. Inventory Transfers are used in this instance to facilitate entry of landed costs, or receive all items on ‘Hold’. Note: The ‘From’ location internal ID must be set for this setting to work.

Print Unit Labels At Receiving (printlabelsatreceiving)

Use this rule to control whether Unit Labels are printed at receiving, and if so, set the number of copies to be printed. Rule is empty by default, enter the json string: { “print_label_default”: “YES”, “print_label_default_qty”: 0 }

Auto create Container ID at Receiving (autocreatecontaineridatreceiving)

This setting will auto-generate Container IDs during receiving. This rule should be used in conjunction with the ‘Print Unit Labels At Receiving’ rule. Rule is set to ‘FALSE’ by default.

Create Item Labels for Return Authorization (createreturnlabelsforrra)

This setting creates item labels for Return Authorizations. Note: The Label ID of the Return Item Label must be set for this setting to work. Rule is set to ‘FALSE’ by default.

Enable Capture Photo at Receipt (enablecapturephotoatrerceipt)

This setting gives users the option to capture a photo at receipt from the Receive Item Quantity page. Rule is set to ‘FALSE’ by default.

Enable allocation to assigned bin (enableassignedpickbin)

This setting allows users to set fixed bin allocation options for their inventory. If no inventory exists, then regular allocation will take over. Rule is set to ‘FALSE’ by default.

Alter Table salesorderdetail, archivesalesorderdetail Add Column so_assigned_bin_id

Add table elements to support the ‘Enable allocation to assigned bin’ rule.

Always Confirm ASN to ERP (alwaysconfirmasntoerp)

This setting will trigger an update to the SPS or ASN record in NetSuite when the ASN is confirmed. Rule is set to ‘FALSE’ by default.

Maximum Numeric Quantity Allowed (maximumnumericquantityallowed)

Use this rule to define a maximum quantity that can be entered for moves, putaway, picks, and adjustments. Setting this value to ‘0’ means an unlimited quantity can be entered. Any negative value entered will be multiplies by ‘-1’ so it is converted to a positive value. Rule is set to ‘10000’ units by default.

Auto Create Lot Expiration Date + Months (autocreatelotexpdatemonths)

Use this rule to define how lot expiration dates are determined. If the value is not empty, this rule will take the current date and add the value (in months) as the lot expiration date. Ex: If today’s date is February 1, and the value is set to 2, the lot expiration date is set to April 1.

Default Receiving Status (defaultreceivingstatus)

Set the default status setting during receiving. By default, the status is set to ‘GOOD’. Enter a different status here to change the default receiving status. Rule is set to ‘GOOD’ by default.

Enable Passport API (enablepassport)

Use this setting to enable Passport Shipping for international shipping via API. Rule is set to ‘FALSE’ by default.

Enable Global-E API (enableglobale)

Use this setting to enable Global-E Shipping for international shipping via API. Rule is set to ‘FALSE’ by default.

Enable Returnly API (enablereturnly)

Use this setting to enable Returnly as a return service via API. Rule is set to ‘FALSE’ by default.

Alter Table item Add Column item_prop_65

Add column to represent California Prop 65 requirements as an item attribute.

Enable Cube Based Putaway (enablecubebasedputaway)

This setting will enable cube-based putaway logic for bins in outbound groups. Rule is set to ‘FALSE’ by default.

Enable Putaway To Assigned Bin (enableputawaytoassignedbin)

This rule will enable putaway logic to set an item’s assigned bin as it’s preferred bin during putaway. Rule is set to ‘FALSE’ by default.

Alter Table item Add Column item_assigned_bin_id Alter Table item Add Index itemAssignedBin

Add table elements to support ‘Enable Putaway To Assigned Bin’ rule. Add column and index to store an item’s assigned bin.

Alter Table rule Add Column rule_empty_not_allowed

Add column to rule table that limits empty bins during putaway process.

API URL for ShipHawk WMS apiurl)

Define the default URL to use for APIs with ShipHawk WMS. Default URL is ‘www.suitewm.com/swmAPI.php’

Enable Freighquote API (enablefreightquote)

Use this setting to enable Freightquote via API. Rule is set to ‘FALSE’ by default.

Inactive APIs (inactiveapis)

Use this setting to inactive specific APIs. If the API ID is listed under this setting, then the associated API will not be executed.

Prohibit Reuseable Totes (prohibitreusabletotes)

Use this rule to prohibit the use of reusable totes. This setting works by prohibiting non- reusable container IDs from being re-scanned during picking. Rule is set to ‘FALSE’ by default.

Enable RocketShipIt V2 (enablerocketshipitv2)

If you choose to use RocketShipIt shipping services with your instance of ShipHawk WMS, this rule will enable the usage of the cloud-based RocketShipIt API Version 2. Rule is set to ‘FALSE’ by default.

Alter Table podetail Add Column po_inco_terms

Add column to purchase order detail table that decides how the receipt is confirmed to the ERP system. The options for confirming a receipt are: Perform standard item receipt process (if terms are empty) Perform inventory transfer from “intransit” to “PO Location” (If terms are FOB Factory) Note: The ‘Confirm Receipt Using Transfer’ rule must be enabled to perform an inventory transfer.

Suppress Receiving Memo (suppressreceivingmemo)

This setting will disable the receiving memo option during returns processing. Rule is set to ‘FALSE’ by default.

Auto create Container ID at Move (autocreatecontaineridatmove)

When enabled, this setting will auto-generate Container IDs during moves. This rule should be used in conjunction with the ‘Print Unit Labels At Receiving’ rule. Rule is set to ‘TRUE’ by default.

Capture Tracking at Receipt (capturetrackingatreceipt)

When enabled, this rule will trigger the capture of a BOL or Tracking number for reference during the receiving process. Rule is set to ‘FALSE’ by default.

Skip Item Verification at Picking (skipitemverificationatpicking)

This rule will skip the item verification at picking process. When this rule is DISABLED, operators will be required to scan or verify an item being picked before the item’s quantity is displayed Rule is set to ‘FALSE’ by default.

Skip Container Type Capture at Packing (skipcontainertypecaptureatpacking)

This rule will skip the container type capture at packing process. When this rule is DISABLED, this process verifies the container type from the ‘Pack Container’ page. Rule is set to ‘FALSE’ by default.

Skip Pack Complete Alert (skippackcompletealert)

This rule will skip the pack complete alert. When this rule is DISABLED, the operator is alerted when the packing process is finished. Rule is set to ‘FALSE’ by default.

Enable Zone Order Picking (enablezoneorderpicking)

This setting enables zone picking, which limits picking activities to bins in this zone. Pick and pass picking between zone is supported with this option. Rule is set to ‘FALSE’ by default.

Days After Shipment to Archive Data (daysaftershipmentdata)

Use this rule to set the number of days after a shipment is scheduled to archive the shipment data in ShipHawk WMS. Rule is set to ‘90’ days by default.

Reciept of Multi-Item Container Allowed (receiptofmultiitemcontaine)

This setting allows the operator to receive a receipt when performing multi-item container packing. Rule is set to ‘FALSE’ by default.

Bill Duties and Taxes to Separate Account (billdutiesseperately)

This setting allows users to bill the duties of a shipment separately from the overall cost to ship. Rule is empty by default, enter the JSON string: { “account”: “7YU8UY”, “postal_code”: “Y65RTA” “country_code”: “CA” }

Create an SSCC19 id for shipping containers (packcreatesscc18id)

When enabled, this rule will auto-generate SSCC18 IDs that will be assigned to containers during packing. Rule is set to ‘FALSE’ by default.

Maximum Cluster Created in a Single Wave (maximumclustertasks)

Use this rule to set the maximum cluster tasks can be created for a single wave pick. Cluster tasks assign one order to be packed per tote/container. Rule is set to ‘10000’ tasks by default.

Maximum Batches Created in a Single Wave (maximumbatchtasks)

Use this rule to set the maximum batch tasks can be created for a single wave pick. Batch tasks assign multiple orders with the same characteristics to be picked in bulk. Rule is set to ‘10000’ tasks by default.

Maximum Super Batches Created in a Single Wave (maximumsuperbatchtasks)

Use this rule to set the maximum super batch tasks can be created for a single wave pick. Super batch tasks assign the operator to pick one batch per tote/container. Rule is set to ‘10000’ tasks by default.

Prompt Operator for Count Attribute (promptoperatorforcountattribute)

When enabled, this setting will prompt the operator to enter the number of attributes in a count.

Capture Container Type at Shipping (capturecontainertypeatship)

This rule will capture the container type during the shipping process. Rule is set to ‘FALSE’ by default.

Count (Manual) Verify Item Only (countverifyitemonly)

This setting will allow the operator to perform a manual count where only the item is verified. Items are not directed to a bin after the count is performed. Rule is set to ‘FALSE’ by default.

Priority pack destination suffix (prioritypackdestinationsuffix)

Use this field to enter the suffix of the pack line is used for priority packing. Rule is set to ‘.P’ by default.

Pre-Assigned Container IDs Defined During Picking (pickpreassignedcontainers)

This setting will automatically pre-assign containers to be used during the picking process. Rule is set to ‘FALSE’ by default.

Enable Pack Add (enablepackadd)

Use this rule to add additional items to current container during packing. Rule is set to ‘FALSE’ by default.

Capture Container Type at Pack (Add Only) (capturecontainertypeatpack)

This rule will capture the container type during Pack Add. This rule is used when the ‘Enable Pack Add’ rule is also enabled. Rule is set to ‘FALSE’ by default.

Enable Electronic Commercial Invoice (enablecommercialinvoice)

This setting will allow you to generate and submit commercial invoices (used for shipping) electronically. Rule is set to ‘FALSE’ by default.

Enable Paper Pick Operations (enablepaperpickoperations)

Enable this setting if you want to run your picking operation in ShipHawk WMS using a paper-driven process, rather than a barcode-scanning process. Rule is set to ‘FALSE’ by default.

Always Ship Using More Options (alwaysshipusingmoreoptions)

This setting will enable the ‘More Options’ button on the ‘Ship Container’ page in ShipHawk WMS. This page allows operators to change the address, carrier, service and more before shipping. Rule is set to ‘FALSE’ by default.

Only Ship Single Containers (onlyshipusingsinglecontainers)

This rule will only allow you to ship containers one-by-one. Rule is set to ‘FALSE’ by default.

ShipHawk WMS Version 1 is Active (version1isactive)

Use this setting to activate Version 1 (V1) of ShipHawk WMS. Rule is set to ‘FALSE’ by default.

Enable Accept All Cycle Counts (enableacceptallcyclecounts)

This setting will accept all counts after they have been executed, regardless of exceptions. Rule is set to ‘FALSE’ by default.

Enable Local Scale Driver (enablelocalscaledriver)

Enable this rule to allow your local scale to connect and print using ShipHawk WMS. Rule is set to ‘FALSE’ by default.

Pack Verify Prohibited Task Types (packverifyprohibitedtasktypes)

Enter any prohibited task type as a string in this field. This rule will ensure prohibited task types listed must be verified before packing. Rule is set to ‘FALSE’ by default.

Pack With Order as Alias Container ID (packwithaliascontainerid)

This setting will pack orders using the alias container ID, instead of the original container id (SSCC18 ID). Rule is set to ‘FALSE’ by default.

Receipt Documents Managed by Location (receiptdocumentsmanagedbylocation)

This setting will organize all the documents generated at receiving by Location. Rule is set to ‘FALSE’ by default.

Default Cycle Count Plan Parameters (defaultcyclecountplanparameters)

This setting sets the default parameters for cycle counts, including the cycle count period. The rule is stored as a JSON string, and the values represent the number of days it takes items in each group to be placed on a count list. To enable, enter the JSON string: { “A”:33, “B”:20 “C”:12 }

Enable Wave Picking (enablewavepicking)

This setting allows operators to perform wave picking. Wave picking is when when all items are picked for an entire wave and placed in a container, unsorted. Rule is set to ‘FALSE’ by default.

FedEx SmartPost Hub ID (fedexsmartposthubid)

This field stores your FedEx SmartPost Hub ID. This is required to use FedEx SmartPost as a shipping option. Enter your Hub ID as a string in this field if you are using FedEx SmartPost. Rule is set to ‘FALSE’ by default.

Ship Confirm: Do Not Alter ERP Line Items (donotaltererplineitems)

When enabled, this setting will withhold altering order line items when the Ship Confirm status is send to your ERP system. Rule is set to ‘FALSE’ by default.

Enable EasyPost Rate Shopping (enableeasypostrateshopping)

This rule will enable EasyPost in your ShipHawk WMS account. EasyPost allows you to rate shop, create labels, and manifest international shipments. Rule is set to ‘FALSE’ by default.

Decimal Inventory Management Settings (decimalinventorymanagement)

This setting sets the standard format for decimals when used for inventory data. Rule is empty by default, enter JSON string: { “active”: false, “step”: 0, “format”: “#” }

Enable Order Type For Pack Rule (enableordertypeforpackrule)

This setting enables the ‘Order Type’ field when packing an order. Rule is set to ‘FALSE’ by default.

Do Not Set ERP Ship Cost (donotseterpshipcost)

This setting prevents the ship cost, which is generated in ShipHawk WMS, from being posted to the ERP system. Rule is set to ‘FALSE’ by default.

Confirm Receipt to PO Locaation (confirmreceipttopolocation)

This setting is used to manage consignment inventory. Receipt is confirmed to the PO Location in the ERP system. Rule is set to ‘FALSE’ by default.

Use Standard ASN Object (usestandardasnobject)

This rule ensures standard ASN tables are being used in your instance of ShipHawk WMS. Rule is set to ‘FALSE’ by default.

SSCC18 GS1 (sscc18gs1)

You can enter a standard GS1 segment to use for your SSCC18 labels in this field. GS1 segment is ‘8889120’ by default.

Enable Container Pick Operations (enablecontainerpickoperations)

This setting enables specific container/lot pick operations. These operations are used for pallet or slot storage of inventory where auto-assignment of containers/lots is not practical. Rule is set to ‘FALSE’ by default.

Enable Receiving Messages Display (enablereceivingmessagesdisplay)

This setting allows your ShipHawk WMS platform to display messages to your operator. Rule is set to ‘FALSE’ by default.

RULE

Verification of Items During Packing (boolean)

packverifyitems

TRUE

RULE

Allow Full Case Picks

pickallowfullcase

TRUE

RULE

Always Ship Using Less Options (boolean)

alwaysshipusinglessoptions

FALSE

RULE

Always Ship Using More Options (boolean)

alwaysshipusingmoreoptions

FALSE

RULE

API URL for ShipHawk WMS (string)

apiurl

http://www.suitewm.com

RULE

Auto create Container ID at Move (boolean)

autocreatecontaineridatmove

TRUE

RULE

Auto create Container ID at Receiving (boolean)

autocreatecontaineridatreceiving

FALSE

RULE

Auto Create Lot Exp Date Months (integer)

autocreatelotexpdatemonths

0

RULE

Bill Duties and Taxes to Separate Accoun (json)

billdutiesseparately

FALSE

RULE

Bypass Pick Profile Page (boolean)

bypasspickprofilepage

FALSE

RULE

Capture Container Type at Pack (Add Only) (boolean)

capturecontainertypeatpack

TRUE

RULE

Capture Container Type at Shipping

capturecontainertypeatship

FALSE

RULE

Capture Container Weight at Packing (boolean)

captureweightatpack

FALSE

RULE

Capture Tracking at Receipt (boolean)

capturetrackingatreceipt

FALSE

RULE

Carrier Suffix Required in NetSuite (boolean)

carriersuffixrequired

FALSE

RULE

Confirm Receipt To PO Location (boolean)

confirmreceipttopolocation

TRUE

RULE

Confirm Receipt Using Transfer (json/boolean)

confirmreceiptusingtransfer

RULE

ConnectShip API Active (boolean)

connectshipapiactive

FALSE

RULE

Count (Manual) Verify Item Only (boolean)

countverifyitemonly

FALSE

RULE

Create a Return Ship Label with Shipment (boolean)

createreturnshiplabel

FALSE

RULE

Create an SSCC18 id for shipping containers (boolean)

packcreatesscc18

TRUE

RULE

Create Item Labels for Return Authorization (boolean)

createreturnlabelsforra

FALSE

RULE

Cycle Count Window (integer)

cyclecountwindow

60

RULE

Days After Shipment to Archive Data

archivedays

90

RULE

Decimal Inventory Management Settings (json)

decimalinventorymanagement

{“”active””: false...

RULE

Default Cycle Count Plan Parameters (json)

defaultcyclecountplanparameters

{“”A””:33,”“B””:20,

RULE

Default Receiving Status (string)

defaultreceivingstatus

GOOD

RULE

Default Ship Label Logo (url)

defaultshiplabellogo

RULE

Disable Putaway Dropdown List (boolean)

disableputawaydropdownlist

FALSE

RULE

Display Item Alias with Item Name (boolean)

displayitemalias

FALSE

RULE

Do Not Allocate Days After Ship Date (integer)

donotallocatedaysaftershipdate

RULE

Do Not Set ERP Ship Cost (boolean)

donotseterpshipcost

FALSE

RULE

Enable Accept All Cycle Counts (boolean)

enableacceptallcyclecounts

FALSE

RULE

Enable Alert Page (boolean)

enablealertpage

TRUE

RULE

Enable Ascending Order Putaway Sequence (boolean)

enableascnedingputawayseq

FALSE

RULE

Enable Auto Pack Remaining to Current Container (boolean)

enableautopackremaining

TRUE

RULE

Enable Batch Shipping (boolean)

enablebatchshipping

FALSE

RULE

Enable Borderlinx API (boolean)

enableborderlinx

TRUE

RULE

Enable Capture of Daily Effective Rate (boolean)

enablecaptureofdailyeffectiverate

TRUE

RULE

Enable Capture Photo at Receipt (boolean)

enablecapturephotoatreceipt

FALSE

RULE

Enable Code Date Entry (boolean)

enablecodedateentry

FALSE

RULE

Enable Container Pick Operations (boolean)

enablecontainerpickoperations

FALSE

RULE

Enable Cube Based Putaway (boolean)

enablecubebasedputaway

FALSE

RULE

Enable Direct Multi Tracking Entry (boolean)

enabledirectmultitrackingentry

FALSE

RULE

Enable EasyPost Rate Shopping (boolean)

enableeasypostrateshopping

FALSE

RULE

Enable Electronic Commercial Invoice (boolean)

enablecommercialinvoice

FALSE

RULE

Enable Freighquote API (boolean)

enablefreightquote

FALSE

RULE

Enable Global-E API (boolean)

enableglobale

TRUE

RULE

Enable Local Scale Driver (boolean)

enableLocalScaleDriver

FALSE

RULE

Enable Manual Freight Charge Entry (boolean)

enablemanualfreightchargeentry

TRUE

RULE

Enable Order Line Edting (boolean)

enableorderlineediting

TRUE

RULE

Enable Order Type For Pack Rule (boolean)

enableordertypeforpackrule

FALSE

RULE

Enable Pack Add (boolean)

enablepackadd

FALSE

RULE

Enable Paper Pick Operations (boolean)

enablepaperpickoperations

FALSE

RULE

Enable Passport API (boolean)

enablepassport

FALSE

RULE

Enable Putaway Logic for Last Known Bin (boolean)

enablelastknownbin

TRUE

RULE

Enable Putaway To Assigned Bin (boolean)

enableputawaytoassignedbin

FALSE

RULE

Enable Receiving Message Display (boolean)

enablereceivingmessagedisplay

FALSE

RULE

Enable Returnly API (boolean)

enablereturnly

FALSE

RULE

Enable RocketShipIt V2 (boolean)

enablerocketshipitv2

TRUE

RULE

Enable Ship Label Logo (boolean)

enableshiplabellogo

TRUE

RULE

Enable Shipment Consolidation (boolean)

enableshipmentconsolidation

FALSE

RULE

Enable Shipping Acount Override by Shipping Service (boolean)

enableaccountoverridebyservice

FALSE

RULE

Enable SPS V2 (boolean)

enablespsv2

TRUE

RULE

Enable Unlimited Item Alias (boolean)

enableunlimiteditemalias

FALSE

RULE

Enable Wave Picking (boolean)

enablewavepicking

FALSE

RULE

Enable Zone Order Picking (boolean)

enablezoneorderpicking

FALSE

RULE

FedEx SmartPost Hub ID (string)

smartposthubid

5802

RULE

Final Shipping Container Used in Picking (boolean)

pickintoshipping

FALSE

RULE

Inactive APIs (string)

inactiveapis

RULE

Integrated Packing/Shipping Process (boolean)

packandship

FALSE

RULE

Integrated Pick/Pack Process (boolean)

pickandpack

FALSE

RULE

Manual Weight Required for Containers (boolean)

manualweightrequiredforcontainers

FALSE

RULE

Maximum Batches Created in a Single Wave (integer)

maximumbatchtasks

100000

RULE

Maximum Cluster Created in a Single Wave (integer)

maximumclustertasks

100000

RULE

Maximum Numeric Quantity Allowed (integer)

maximumnumericquantityallowed

10000

RULE

Maximum Super Batches Created in a Single Wave (integer)

maximumsuperbatchtasks

100000

RULE

Maximum Totes in a Cluster (integer)

pickmaximumtotes

4

RULE

Maximum Totes in a Super Batch (integer)

pickmaximumsbtotes

6

RULE

Only Ship Single Containers (boolean)

onlyshipsinglecontainers

FALSE

RULE

Pack Edit Do Not Create SSCC18 (boolean)

packeditdonotcreatesscc18

FALSE

RULE

Pack Verify Prohibited Task Types (String)

packverifyprohibitedtasktypes

NONE

RULE

Pack With Order as Alias Container ID (boolean)

packwithaliascontainerid

FALSE

RULE

Pre-Assigned Container IDs Defined During Picking (boolean)

pickpreassignedcontainers

RULE

Print an SSCC18 id at packing for shipping containers (boolean)

packprintsscc18

FALSE

RULE

Print Case Labels At Receiving (json/boolean)

printcaselabelsatreceiving

{“”print_label ...

RULE

Print Copies of Commercial Invoice (int)

commercialinvoicecopies

1

RULE

Print Ship Labels At Packing (json/boolean)

printlabelsatpacking

RULE

Print Unit Labels At Receiving (json/boolean)

printlabelsatreceiving

{“”print_label ...

RULE

Priorty pack destination suffix (string)

priortypackdestinationsuffix

.P

RULE

Prompt Operator for Count Attribute (string)

capturecountattribute

RULE

Receipt Documents Managed by Location (boolean)

receiptdocumentsmanagedbylocation

FALSE

RULE

Receipt of Multi-Item Container Allowed (boolean)

receiptmultiitemcontainer

TRUE

RULE

Receipt Percent Overage Allowed (20 = 20% Overage) (integer)

receiptpercentoverageallowed

20

RULE

Return Service Codes for Carriers (json/boolean)

returnservicecode

{“”UPS””: “”03””,...

RULE

Ship Confirm: Do Not Alter ERP Line Items (boolean)

donotaltererplineitems

FALSE

RULE

Skip Container Type Capture at Packing (boolean)

skipcontainertypecaptureatpacking

FALSE

RULE

Skip Item Verification at Picking (boolean)

skipitemverificationatpicking

FALSE

RULE

Skip Pack Complete Alert (boolean)

skippackcompletealert

FALSE

RULE

Skip Pack Directive (boolean)

skippackdirective

FALSE

RULE

SSCC18 GS1 (string)

sscc18gs1

8889120

RULE

ShipHawk WMS Version 1 is Active (boolean)

version1isactive

FALSE

RULE

Suppress BOL (boolean)

suppressbol

FALSE

RULE

Suppress Confirming Adjustments to ERP (boolean)

suppressconfirmingadjustmentstoerp

FALSE

RULE

Suppress Receiving Memo (boolean)

suppressreceivingmemo

FALSE

RULE

Suppress Using Container ID (boolean)

suppressusingcontainerid

FALSE

RULE

Threshold Maximum Quantity for Batch/Super Batch/Wave Units (integer)

pickbatchmaximumunits

10000

RULE

Threshold Quantity for Batch/Super Batch (integer)

pickbatchthreshold

30

RULE

Use Standard ASN Object (boolean)

usestandardasnobject

TRUE

RULE

Verification of Items During Packing (boolean)

packverifyitems

TRUE